Velleman К8082 - Manual (Page 15)

15
Menu options
Remark: you can only access the menu when the output relay is off
Hold the button to enter the setup menu
The display shows '-'. If button is released at this time, no settings will be altered.
The decimal dot will flash 3 times, to confirm you left the menu.
If the unit was set to ‘timer mode’, the display will flash the current set time.
Turn knob in any direction to select a menu item, while still holding the button.
(6) MENU OPTIONS
't' timer mode : The output relay generates a timed pulse between 0.5 and 9s
To set timer mode:
Release button.
Set required time (0..9s, 0 = 0.5s)
Hold button
Select ‘t’
Release button
Display will flash selected time to confirm selection.