Velleman PCGU1000 - Manual (Page 7)

7
Starting the software :
Locate the
Pc-Lab2000 SE software shortcuts (programs.. Pc-Lab2000 SE …)
Click the icon
to start the main program.
•
Select your connected
hardware.
• Select your appropriate
LPT port (if used).
• Press OK or choose “ demo
mode ”.
The main program automatically launches the Oscilloscope module, which is
shown on the next page.
If you like to change the setup:
Click the Options menu, and select ‘ Hardware Setup’ .
Hint for LPT connected devices:
Should you experience troubles (e.g. When using a laptop or an oddball computer ), try a
different port address and/or choose the ‘Slow’ communication speed. Check also the port
settings in the computer BIOS setting, test with the deferent settings; EPP (works in most
cases), SPP, ECP... . For some Windows versions an additional I/O driver located on the
CD could be needed.
Starting the software
REMARK: The actual screen can differ from the one shown in this
manual. The PCS100 / K8031 has only 1 channel
.