Veris Verabar V110 Spec Sheet - Manual (Page 2)

Vera
bar ®
Vera
bar
Flow
Ca lcula
tion
Pro gra m Flow
Ca lcula
tion
Pro gra m
5.
Flow Calculation
All Verabar applications require a flow calculation to verify
the DP, pressure and temperature limits, structural limits
and to size the transmitter. The Veracalc PC Program
is for use by representatives and end users. It is easy
to operate and includes steam tables.
V100 (Single Support)
V110 (Double Support)
Verabar
®
Regular Models
Instrument
head (SS)
Tube fitting
(SS)
Weld coupling
(CS) (SS-opt)
Sensor (316SS)
Sensor (316SS)
4.
Select Model from Page 3
Use the Ordering Information table on Page 3 to determine your
model number.
Short
Straight Run
Consult Factory
(V) Vertical
(H) Horizontal
Pipe Size _____ Sch _____
Pipe ID _____ and
Wall _____ Pipe Mat’l _____
Wall
Height (H) _____
Width (W) _____
Wall _____
Duct Mat’l _____
Dimension
Verabar spans
(H) or (W)
Fluid Name: Maximum Normal Minimum Units
Flow Rate
All
Temperature @ Flow
Fluids
Pressure @ Flow
Gas
Specific Gravity, or
Molecular Weight
Liquid Specific Gravity
Steam Veracalc Program can calculate Density from Temperature and Pressure
ID
W
H
2.
Pipe or Duct Orientation
3.
Enter Flow Conditions
1.
Enter Pipe Dimensions or Duct Dimensions
Furnish the following information:
Weld coupling
(CS) (SS-opt)
Instrument
head (SS)
Tube fitting
(SS)
Weld coupling
(CS) (SS-opt)
Plug (CS)
(SS-opt)