Veris Verabar V150 Spec Sheet - Manual (Page 2)

Vera
bar ®
Vera
bar
Flow Calculation Program Flow Calculation Program
5.
Flow Calculation
All Verabar applications require a flow calculation to verify
the DP, pressure and temperature limits, structural limits
and to size the transmitter. The Veracalc PC Program
is for use by representatives and end users. It is easy
to operate and includes steam tables.
V150 Spring Lock
Verabar
®
Regular Models
4.
Select Model from Page 3
Use the Ordering Information table on Page 3 to determine your
model number.
Short
Straight Run
Consult Factory
(V) Vertical
(H) Horizontal
Pipe Size _____ Sch _____
Pipe ID _____ and
Wall _____ Pipe Mat’l _____
Wall
Height (H) _____
Width (W) _____
Wall _____
Duct Mat’l _____
Dimension
Verabar spans
(H) or (W)
Fluid Name: Maximum Normal Minimum Units
Flow Rate
All
Temperature @ Flow
Fluids
Pressure @ Flow
Gas
Specific Gravity, or
Molecular Weight
Liquid Specific Gravity
Steam Veracalc Program can calculate Density from Temperature and Pressure
ID
W
H
2.
Pipe or Duct Orientation
3.
Enter Flow Conditions
1.
Enter Pipe Dimensions or Duct Dimensions
Furnish the following information:
Model V150
Load
indicator
gap
Load plate (SS)
Load springs
Indicator ring (SS)
Graphite packing
Follower (SS)
Spring Lock
body (SS)
Spring Lock Mount
• Design ensures the sensor is sealed, locked and pre-loaded to the
opposite wall, regardless of changes in pipe diameter due to pressure,
temperature or mechanical vibrations.
• Leak-proof…compensates for differential in packing and body growth
rates due to increased temperatures.
• Increases sensor strength (eliminates the need for an opposite wall
support). A locked, pre-loaded sensor is four times stronger than
a non pre-loaded, cantilevered sensor.
• Spring Lock is engineered with three standard spring configurations
equivalent to ANSI class 150#, 300# and 600# ratings.
• By loading the sensor and packing independently, the sensor can
move axially to maintain a precise load on the pipe wall.
Instrument head
(SS)
Packing body (SS)
(Graphite packing)
Weld coupling (CS)
(SS-opt)
Sensor (316SS)
Spring Lock
load plate (SS)
Studs & nuts (SS)
Packing follower (SS)