Temperature alert on/off, Cleaning and maintenance, Storage – Philips MONITOR SCD489 User Manual

Page 13: Environment

Advertising
background image

sound alert on/of

If the sound alert is switched on, the parent unit beeps as soon as the fifth sound level light starts to

burn orange while the volume is switched off..

1

Select X by pressing the – and + buttons and confirm by pressing the OK

button.



Select C or V and confirm by pressing the OK button.

Setting room temperature range

You can set the temperature range (minimum and maximum temperature) for your baby’s room.

1

Select B– – ° by pressing the – and + buttons and confirm by pressing

the OK button.

N

appears on the display.



Confirm by pressing the OK button.



Set the desired minimum temperature by pressing the – and + buttons and confirm by

pressing the OK button.



Set the desired maximum temperature by pressing the – and + buttons and confirm by

pressing the OK button.

Note: When the maximum temperature selected is lower than the room temperature, the unit consumes

more power because the display will be on continuously. This is also the case when the minimum

temperature set is higher than the room temperature.

temperature alert on/off

If the temperature alert is switched on, the parent unit beeps if the actual room temperature

exceeds the set maximum temperature or drops below the set minimum temperature. If no

temperature has been set, the temperature alert will go off when the room temperature drops

below 7°C or rises above 33°C.

1

Select B– – ° by pressing the – and + buttons and confirm by pressing

the OK button.



Select M by pressing the – and + buttons and confirm by pressing the OK

button.



Select C or V and confirm by pressing the OK button.

Cleaning and maintenance

Do not immerse the parent unit and the baby unit in water and do not clean them under the tap.
Do not use liquid cleaners or aerosol cleaners.

1

Unplug the baby unit, if it is connected to the mains, and take the parent unit out of the

charger.



Clean the parent unit and the baby unit with a damp cloth.

Make sure the parent unit is dry before you place it back in the charger.



Clean the charger with a dry cloth.

,

EngliSh

1

Advertising
This manual is related to the following products: