V-Tech DT27_TD7 Manual - Manual (Page 6)

5
7. Date and Time Setting
Touch User Setup item on main menu page to enter
setup page, touch Clock... item. a digital keypad
will be showed on screen, input date and time by
touching the digital keypad,use * key to select the
setting item. After finish, touch icon to save and
exit.(touch icon to cancel the setting and return
last page.)
Cancel Save&Exit
Clock
2010 - 12 - 28 15 : 00
1 2 3
4 5 6
7 8 9
* 0 #
8. Monitor Time settig
Touch Manual Monitor item on main menu page
to get into camera switch mode, select Monitor Time
Set... item. touch ▲ / ▼ icon to increase / decrease
the value; After finish, touch icon to save and
exit.(touch icon to cancel the setting and return
last page, touch icon to get into main menu page)
Cancel Home Save&Exit
Monitor Time Select
Current : 01min
Ring Volume and Night Ring Volume Setting
You can set a ring volume for day time and night
time individually, 6:00 AM~18:00 PM is the day
time and 18:00 PM~6:00 AM is the night time by
default,if you don't want to be disturbed at night,you
can set the night ring volume to 0.
Touch User Setup item on main menu page to
enter setup page,then touch Next Page item to enter
User Setup 2 page, select Ring Volume Setting or
Night Ring Volume item. then touch ▲ / ▼ icon to
increase / decrease the value; After finish, touch
icon to save and exit.(touch icon to cancel the
setting and return last page, touch icon to get into
main menu page)
Cancel Home Save&Exit
Ring Volume
Current : 05
Exit Home
User Setup (2)
Ring Volume ...
Night Ring Volume ...
TPC Configure ...
Restore to default ...
Last Page