V-Tech DT27_TD7 Manual - Manual (Page 7)

9. Restore to Default
Touch User Setup item on main menu page to enter setup page,then touch Next Page
item to enter User Setup 2 page, touch Restore to default item ,a message will be asked
to confirm the restore operation. If touch icon ,All settings will be restored to
default, if you don't want to restore, touch icon to cancel the operation.(Note that the
restore to default operation will not change the time setting and the datas.)
A Monitor can be assigned as Guard Unit Monitor; when the Guard Unit Monitor
answers the call, conversation with the guard person is started..
The code number of 8004 is used to set the monitor as a guard unit monitor and 8005 is
used to cancel this function.
Exit Home
User Setup (2)
Ring Volume ...
Night Ring Volume ...
TPC Configure ...
Restore to default ...
Last Page
Cancel OK
Restore to Default
Are you sure to
Restore all to default?
6
10. Monitor Parameter Setting
Main Menu
About i
Monitor ...
Manual Monitor
Intercom
User Setup
Close
Exit
H/W : DT14-CT a1.3
S/W: V17.11.418.00
Local addr: ---
Unlock timing: ---
Unlock2 select: -
Video standard: -
Language: ---
Exit Home
Input Code Number:[- - - -]
1 2 3
4 5 6
7 8 9
* 0 #
1.Touch item
on main menu page.
2.Touch the screen
anywhere and hold for
2s.
3.A digital keypad
will be showed.
How to enter the installation setting page
How to set the monitor as a Guard Monitor