V-Tech DT596F_ID Manual - Manual (Page 13)

5.DIP Switches Setting
DIP Switches Settings of Monitor
DIP Switches Settings of Door Station
Total•4•bits•on•the•DIP•switches•can•be•configured.The•switches•can•be•modified•either•before•or•after•
installation.
Setting Item Bit state Descriptions
Bit1•and•Bit2
(it•is•used•to•set•the•ID•
code•for•door•station)
Default•setting,•ID•=•0(00),•set•to•the•first•Door•Station.
ID•=•1(10),•set•to•the•second•Door•Station.
ID•=•2(01),•set•to•the•third•Door•Station.
ID•=•3(11),•set•to•the•fourth•Door•Station.
Bit3
The•relay•2•doesn't•respond•the•second•lock,showing•user•
cards•controlled•two•locks•or•pressing•unlock•2nd•on•monitor•
can•not•release•the•second•lock.During•this•time,After•
continuously•showing•access•card•10•times,the•relay•2•will•be•
closed•for•60•seconds,the•blue•LED-relay•2•will•be•illuminated•
for•60•seconds,•and•the•buzzer•will•continuously•sound,If•the•
system•is•connected•alarm,the•alarm•function•will•be•activated.
The•relay•2•responds•the•second•lock.
Bit4 Used•to•authorize•master•card
There•are•6•bit•switches•in•total.•The•DIP•switches•are•used•to•configure•the•user•code•for•each•Monitor.
1 2 34
ON
1 2 34
ON
1 2 34
ON
1 2 34
ON
1 2 3 4
ON
1 2 3 4
ON
ON(1)
=
OFF(0)
=
ON ON
-11-