V-Tech AT16_D4 Manual - Manual (Page 6)

3. Intercom Call : you can call the other users in the
same network with you. Input the building code and
room number by using ▲ / ▼ Button to increase /
decrease the value; use Button to select next digit;
After finish, press
Talk Button to active the calling,
a call message will be sent out, if the system is free,
you will heard the feedback rings, you can talk with
someone who answers the call.Press
Button to
return Intercom Function page.
4. Basic Setup Instructions
4.1 How to Enter Main Menu Page
4.2 Ring Tone Settings
1. Press MENU Button in standby mode, the date/time page will be showed. (the
date/time page will be closed in 3 minutes if no operation)
2. Press MENU Button again, main menu page will be showed.
Select
setup
item on main menu page to enter setup page.There are 12 pieces ring tones
can be selected.use / Button to select last/next ring tone,it will perform
immediatelly.
Door Station Tone :set the ring tone calling from
outdoor station.
Door Bell Tone :set the ring tone calling from door bell.
Guard Unit Tone :set the ring tone calling from guard
unit.
Door Station Tone -- 01
Door Bell Tone -- 05
GuardUnit Tone -- 05
No Disturb Mode -- off
Installation...
Exit
3