V-Tech AT16_D4 Manual - Manual (Page 9)

6. Defense Alarm Operation(optional)
This system have auto-alarm function to ensure the security for the house owner. Total
4 different sensors were placed to protect different defense area. When the sensor was
triggered, the monitor will sent out alarm sound immediately and will sent the alarm signal
to the guard center at the same time. Note that your system may not have all the 4 sensors
according to the system configuration.
Motion Sensor
Delay sensor, normally it will be
placed on doors or windows.
If the sensor is set, when the
door or window is opened,
the monitor will sent out alarm
sound and sent the alarm signal
to the guard center.
Smoke Sensor
24-hour sensor, this sensor
is opened by the system by
default. It can be placed on
living room or kitchens. if any
fire happened in the area, the
monitor will sent out alarm
sound and sent the alarm signal
to the guard center.
Infrared Sensor
Delay sensor, can be placed on
living room or bedrooms. When the
sensor is set, if some body invade
into the defence area, the monitor
will sent out alarm sound and
sent the alarm signal to the guard
center. You can set this sensor when
nobody at home.
Emergency Help Button
24-hour sensor, this sensor is
opened by the system by default.
It can be placed any where
suitable. if any fire happened in
the area, the monitor will sent
out the emergency help signal to
the guard center.
1. Select item on main menu page to enter alarm
function page as show on the right.
2. Use ▲ / ▼ Button to select, press MENU Button to
confirm. If the current state is Armed, the 'Disarm'
icon is selectable, and vice versa.
6