VTech SN6197_-2 Abridged manual - Manual (Page 9)

Getting started
3
Handset charger installation
Electrical outlet
not controlled
by a wall switch
Handset charger
power adapter
IMPORTANT:
Check for a dial tone by pressing . If you hear a dial tone, the installation
is successful.
If you do not hear a dial tone:
Make sure the installation procedures described above are properly done.
It may be a wiring problem. If you have changed your telephone service
to digital service from a cable company or a VoIP service provider, the
telephone line may need to be rewired to allow all existing telephone jacks
to work. Contact your cable/VoIP service provider for more information.
•
•
Install the charger as below. 1. Place the handset in the
handset charger to charge.
2.
Stays red when
put in charger.
CHARGE