VTech CS6759_-3 Abridged manual - Manual (Page 8)

8
Answering system operation
The built-in answering system must be turned on to answer and
record messages.
Call intercept:
If you want to talk to the person whose message is being recorded, press
or on the handset or press /SPEAKER on the telephone base.
Remote access
You can access the answering system remotely from any touch-tone
telephone. The preset remote access code is 19.
Dial your telephone number from any touch-tone telephone.
When the answering system answers, enter the two-digit remote
access code.
Press
5 to hear a list of remote commands.
Enter the desired remote command code.
Hang up or press
8 to end the call.
1.
2.
3.
4.
5.
Go to pages 3-4 to learn some common settings for your
answering system.
i
Repeat the playing message.
Press twice to listen to the
previous message.
•
•
Delete the playing message.
Press twice in idle mode to
delete all messages.
•
•
Skip to the next message. •
Adjust the speaker volume. •
Start message playback.
Stop messge playback. •
•
Turn the answering system Turn the answering system
on or off.
•