Appendix, Handset battery – VTech CTM-A242SD Manual User Manual

Page 81

Advertising
background image

78

Appendix

Handset battery

It takes up to 16 hours for the battery to be fully charged. When it is fully charged, you can expect the following performance:

Operation

Operating time

While in handset use (talking*)

Up to 7 hours

While in speakerphone mode (talking*)

Up to 5 hours

While not in use (standby**)

Up to 7 days

* Operating times vary depending on your actual use and the age of the battery.
** Handset is not charging or in use.

The battery needs charging when:

A new battery is installed in the handset.
LOW BATTERY LED flashes on the cordless handset.

CAUTION:
To reduce the risk of fire or injury, read and follow these instructions:

Use only the supplied rechargeable battery (BT264392/BT266342) or replacement battery (BT266342). To order a replacement,

visit our website at www.vtechhotelphones.com or call 1-888-907-2007.
Do not dispose of the battery in a fire. Check with local waste management codes for special disposal instructions.
Do not open or mutilate the battery. Released electrolyte is corrosive and may cause burns or injury to the eyes or skin. The

electrolyte may be toxic if swallowed.
Exercise care in handling the battery in order not to create a short circuit with conductive materials.
Charge the battery provided with or identified for use with this product only in accordance with the instructions and limitations

specified in this manual.
Observe proper polarity orientation between the battery and metallic contacts.
To prevent fire or shock hazard, do not expose this product to water or any type of moisture.





Advertising