Vutec PROJECTOR SCISSOR LIFT - Installation Instructions User Manual
Page 3
General Information:
1- The control panel must be installed or positioned in the way that the operator has
a constant visual of the lift during its travel while installation, setting limit switches
and regular use.
2- The projector lift and other equipment may only be installed when the installer is
working on a rigid and stable platform.
3- It is allowed to mount (1) piece of equipment, keeping the allowed maximum load
of 25 lbs.
4- When more equipment needs to be installed, the equipment must be assembled
in a way that they are mounted together as (1) piece underneath the lift, keeping
the allowed maximum load.
5- When loads are mounted underneath the lift it is important that the point of
gravity of the load is centered underneath the lift.
6- When the lift is faulty during normal use or during testing, it must be taken out of
service immediately. Repairs must be done by a approved technician.
Following are the primary steps involved in the planning and completion of a standard
installation.