GLOBALSAT BT-368 - Manual (Page 13)

Copyright © 2007, Globalsat Technology Corporation
Page 13 of 14
13. You can start the navigation software or
GPSinfo program to check the GPS
positioning status.
5.2 Bluetooth is unable to be connected
(1) Check if the Bluetooth status LED is flashing normally.
(2) Check if the battery power is enough. If not, please recharge it.
(3) Check if the other Bluetooth device is enabled or not.
5.3 GPS cannot be positioned
(1) Check if the GPS status LED is flashing normally.
(2) Check if the battery power is enough. If not, please recharge it.
(3) If GPS cannot be positioned for long, apply GPSinfo software to make it a Cold Start,
and move it to an open space for performing the positioning task.