GLOBALSAT BT-368 - Manual (Page 8)

Copyright © 2007, Globalsat Technology Corporation
Page 8 of 14
4. Getting Start
Step 1: Charging Battery
Please charge the battery by the included charger till the orange LED goes off
before using BT-368 for the first time.
Step 2: Turn on the power
Press and hold the power button for one second to turn on your BT-368.
Step 3: Wait for GPS fixed
Place your BT-368 in a place where it can see the sky directly and check the GPS
LED. If the GPS LED starts blinking, your position is fixed.