VEGA VEGAMET 624 - Manual (Page 26)

26
6 Setup with the integrated display and adjustment unit
VEGAMET 624 • 4 … 20 mA/HART
28969-EN-130701
•
Sensor type and serial number
•
Date of manufacture and software version
•
Date of last change using PC
•
Instrument features
•
MAC address (with interface option Ethernet)
Additional adjustment and diagnostics options are available via the
Windows software PACTware and the suitable DTM. Connection can
be made optionally via the built-in standard interface or one of the
optionally offered interfaces (RS232/Ethernet). Further information
is available in chapter "Parameter adjustment with PACTware", in
the online help of PACTware or the DTM as well as in the operating
instructions manual "RS232/Ethernet connection". An overview of
the standard functions and their adjustment options can be found in
chapter "Functional overview" in the "Supplement".
6.3 Menu schematic
Information:
Depending on the instrument version and application, the highlighted
menu windows are not always available.
Measured value indication
Device settings
Optional settings