VEGA VEGAPULS 68 (≥ 2.0.0 - ≤ 3.8) 4 … 20 mA_HART two-wire - Manual (Page 44)

Factory setting
L
ike basic adjustment, furthermore special parameters are reset to
default values. 2)
Pointer
T
he min. and max. distance values are reset to the actual value.
A dditional adjustment and diagnosis options such as e.g. scaling,
simulation or trend curve presentation are shown in the following menu
schematic. You will find a detailed description of these menu items in
the operating instructions manual "Indicating and adjustment module".
2) S pecial parameters are parameters which are set customer-specifically on
the service level with the adjustment software PACTware.
Optional settings
44 VEGAPULS 68 • 4 … 20 mA/HART two-wire
6 S et up with the indicating and adjustment module PLICSCOM
29261
-EN
-090305