VEGA VEGAPULS 67 (≥ 2.0.0 - ≤ 3.8) Profibus PA User Manual
Page 15
Advertising
Fig. 5: Radar sensor with mounting strap
The strap is supplied unassembled and must be screwed to the sensor
before setup with three hexagon nuts M5x10 and spring washers.
Max. torque, see chapter "Technical data". Required tools: Allen
wrench size 4.
There are two ways to screw the strap onto the sensor. Depending on
the selected version, the sensors can be swivelled in the strap as
follows:
l
Single chamber housing
-
Angle of inclination 180°, infinitely variable
-
Angle of inclination in three steps 0°, 90° and 180°
l
Double chamber housing
-
Angle of inclination 90°, infinitely variable
-
Angle of inclination in two steps 0° and 90°
VEGAPULS
67 • Profibus PA
15
4 Mounting
32940
-EN
-100514
Advertising