4 mounting – external housing (instrument housing), 4 mounting - external housing (instrument housing) – VEGA VEGAWAVE - External housing User Manual
Page 10
90 mm (3.54")
R 3,5 mm
(0.14")
3mm
(0.12")
70 mm (2.76")
8 mm
(0.32")
93 mm (3.66")
110 mm (4.33")
Fig. 4: Drilling template - wall mounting plate
Tip:
Mount the wall mounting plate so that the cable entry of the socket
housing points downward. Rain and condensation water can thus drain
off. The socket housing can be displaced by 180° to the wall mounting
plate.
Turn the cable gland of the instrument housing downward. The basic
body of the instrument housing can be turned by 330° without any
tools.
Warning:
The four screws of the socket housing must only be hand-screwed. A
torque > 5 Nm (3.688 lbf ft) can damage the wall mounting plate.
4
.4 Mounting - external housing (instrument
housing)
à
Mount the sensor to the bottom, depending on the process fitting
Note:
When mounting the sensor, note the instructions in the operating
instructions manual of the sensor.
10
VEGAWAVE - External housing
4 Mounting
32357
-EN
-081119