5 connect the sensor to the external housing, 1 preparing the connection, 2 connection procedure – VEGA VEGAWAVE - External housing User Manual
Page 11: 5connect the sensor to the external housing
5
Connect the sensor to the external housing
5
.1 Preparing the connection
Follow the instructions in the operating instructions manual of the
sensor.
5
.2 Connection procedure
Note:
The metal sensor housing cannot be opened. The electrical
connection must be carried out on the instrument housing.
1
Insert the cable end through the cable entry on the external
housing (instrument housing)
Tip:
Only run the cable loosely. The connection cable can only be
separated on the external housing (instrument housing). If the sensor
should be dismounted, the connection cable must be free to take out
the sensor.
1 2 3 4
Fig. 5: Connection of the sensor in the socket housing
1
Red
2
Yellow
3
Black
4
Green
VEGAWAVE - External housing
11
5 Connect the sensor to the external housing
32357
-
EN
-081119