5 menu schematic, Display, Optional settings – VEGA VEGABAR 54 Foundation Fieldbus User Manual
Page 34
34
6 Set up with the display and adjustment module PLICSCOM
VEGABAR 54 • Foundation Fieldbus
36732-EN-130321
Default setting
Like basic adjustment, but in addition, special parameters are reset to
default values.
7)
Peak value
The min. and max. distance values are reset to the actual value.
Additional adjustment and diagnosis options such as e.g. scaling,
simulation or trend curve presentation are shown in the following
menu schematic. You will find a detailed description of these menu
items in the operating instructions manual "Display and adjustment
module".
6.5 Menu schematic
Information:
Depending on the version and application, the highlighted menu
windows may not always be available.
Basic adjustment
▶
Basic adjustment
1
Display
Diagnostics
Service
Info
Unit
1.1
Unit of measurement
bar
▼
Temperature unit
°C
▼
Position correction
1.2
Offset
P
=
0.2 mbar
0000 mbar
Min. adjustment
1.3
000.0 %
=
0.0 mbar
0.0 mbar
Max. adjustment
1.4
100.00 %
=
100.00 mbar
0.0 mbar
Damping
1.5
0 s
Linearization curve
1.6
linear
▼
Sensor-TAG
1.7
Sensor
Display
Basic adjustment
2
▶
Display
Diagnostics
Service
Info
Displayed value
2.1
AI-Out
Backlight
2.4
Switched off
▼
Optional settings
7)
Special parameters are parameters which are set customer-specifically on
the service level with the adjustment software PACTware.