VEGA VEGABAR 81 Save sensor - Operating Instructions User Manual

Page 45

Advertising
background image

45

9 Supplement

VEGABAR 81 • Slave sensor for electronic differential pressure

45049-EN-131011

Ʋ Flange 3" 150 lbs RF, ANSI B16.5

0.25 mbar/10 K

Ʋ Flange 3" 150 lbs RF, ANSI B16.5 with

extension 2 "

1.34 mbar/10 K

Temperature coefficient of a cooling ele-

ment, depending on the diaphragm-ø

0.1 … 1.5 mbar/10 K

Temperature coefficient of a 1 m

long capillary line, depending on the

diaphragm-ø

0.1 … 15 mbar/10 K

Long-term stability (according to DIN 16086 and IEC 60770-1)
Turn down (TD) is the relation nominal measuring range/adjusted span.
Long-term drift of the zero signal

4)

< (0.1 % x TD)/year

Process conditions
Product temperature depending on the measuring cell seal

5)

The specifications are an overview. The specification on the type plate are valid.

Measuring cell seal

Product temperature - standard

version

Product temperature - version

with extended temperature range

FKM (VP2/A)

-20 … +130 °C (-4 … +266 °F)

-20 … +150 °C (-4 … +302 °F)

FKM (A+P 70.16)

-40 … +130 °C (-40 … +266 °F)

-

FKM (ET 7067)

-20 … +130 °C (-4 … +266 °F)
1 h: 140 °C/284 °F cleaning tem-

perature

-

EPDM (A+P 75.5/KW75F)

-40 … +130 °C (-40 … +266 °F)
1 h: 140 °C/284 °F cleaning tem-

perature

-40 … +150 °C (-40 … +302 °F)

EPDM (ET 7056)

-40 … +130 °C (-40 … +266 °F)
1 h: 140 °C/284 °F cleaning tem-

perature

-

FFKM (Kalrez 6375)

-20 … +130 °C (-4 … +266 °F)

-20 … +150 °C (-4 … +302 °F)

FFKM (Perlast G75S)

-15 … +130 °C (-4 … +266 °F)

-15 … +150 °C (5 … +302 °F)

FFKM (Perlast G75B)

-15 … +130 °C (-4 … +266 °F)

-15 … +150 °C (5 … +302 °F)

FFKM (Chemraz 535)

-30 … +130 °C (-22 … +266 °F)

-

FEPM (Fluoraz SD890)

-5 … +130 °C (-22 … +266 °F)

-

Product temperature depending on the ambient temperature

Ambient temperature

Product temperature

+50 °C (+122 °F)

+150 °C (+302 °F)

+80 °C (+176 °F)

+100 °C (+212 °F)

Mechanical stress, depending on the instrument version

4)

Depending on which chemical seal is used, the values can also be higher.

5)

With process fitting PVDF, max. 100 °C (212 °F).

Advertising