Yamaha DVD-S2500 - Manual (Page 29)

25
Eng
lish
Operation
This player can playback JPEG format pictures on a
personally recorded CD-R/RW disc or commercial CD.
Disc structure
JPEG disc features
The JPEG format (ISO 9660 format) supports
the following:
• Max nested directories, 8 levels.
• Max numbers of rolls are 99.
• Max numbers of pictures are 999.
• The files with the extensions of “.JPEG”, “.jpeg”,
“.JPG”, or “.jpg”.
The following types of disc and conditions are
not supported:
• Discs with playback control functions
• The discs that have any types of file other than MP3
and JPEG
• The simultaneous playback of the JPEG and MP3
files
• Progressive JPEG formatted discs
• Non-finalized discs
• UDF formatted discs
Notes:
– The disc read time may exceed 10 seconds if the disc
has large amount of pictures. The read time may vary
depending on the file types and sizes.
– Multi-session discs are supported.
Playing a disc
1 Insert the disc and close the tray.
➜ Playback starts automatically.
➜ Thumbnails are displayed on screen.
A chosen thumbnail can be displayed on full screen.
Move the cursor with k n l h to select the
thumbnail, and press ENTER/OK. Press MENU to
return to the thumbnail screen.
2 Press PLAY during a full screen mode.
➜ The slide show starts.
3 To stop playback, press STOP.
➜ The slide show stops.
• Press MENU to return to the thumbnail screen.
• When you press PAUSE, the slide show pauses. To
return to the normal slide show, press PLAY.
• Repeat and shuffle function are also available for JPEG
discs.
Slide show setting
You can set the duration of each image.
Picture Time
1 Press ON SCREEN.
➜ The On-screen menu appears.
2 Go to [Picture Time] (Toolbar ➔ Slide Show ➔
Picture time) by using k n l h buttons, then press h.
3 Make a choice with k n.
Choices: Slow (about 8 sec), Medium (about 5 sec),
Fast (about 2 sec)
4 To return to the previous menu, press l.
• To exit from the On-screen menu, press ON SCREEN.
Rotating the image
You can rotate the JPEG image.
1 Press ON SCREEN.
➜ The On-screen menu appears on the screen.
2 Go to [Rotate] (Toolbar ➔ View ➔ Rotate) by using
k n l h buttons, then press h.
3 Make a choice with l h.
Choices: –180, –90, 0, +90, +180
4 To return to the previous menu, press l.
• To exit from the On-screen menu, press ON SCREEN.
Note:
– This function is not available during slide show
playback.
JPEG
Roll 1 Image 1
Image 2
Image 3
Roll 2 Image 1
Image 2
Image 3
Picture Time
JPEG
image
1
Picture Time Picture Time
JPEG
image
2
JPEG
image
3