Yamaha DVD-S2500 - Manual (Page 7)

3
Eng
lish
Introduction
The unit is designed to support the Region Management
System. Check the regional code number on the disc
package. If the number does not match the unit’s region
number (see table below, or see back of unit), the unit
may be unable to play the disc.
Check your package to make sure it contains the
following items:
Insert the batteries in the correct direction by aligning
the “+” and “–” marks on the batteries with the polarity
markings “+” and “–” inside the battery compartment.
1 Remove the back cover.
2 Insert the two supplied batteries (AA, R6, UM-3) into
the battery compartment.
3 Close the back cover.
Replace worn batteries
Worn batteries limit the operating range of the remote
control. Replace both batteries at the same time.
• Replace both batteries if you notice a decrease in the
operating range of the remote control.
• Do not use old batteries with new ones.
• Do not use different types of batteries (such as
alkaline and manganese) together. Read the battery
packaging carefully. Different types of batteries may
be the same shape or color.
• If the batteries leak, dispose of them immediately.
Avoid touching the leaked material or letting it come
into contact with clothing, etc. Clean the battery
compartment thoroughly before installing new
batteries.
Region management
information
Model
Region
number of
the unit
Discs that can be
played (Example)
U.S.A. model
U.K. and
Europe models
Supplied accessories
1 1 ALL
2 2 ALL
Remote control Batteries (x2) (AA, R6, UM-3)
Audio/Video cable Power cable
Installing batteries in the
remote control