Milton CAT G200LG4 200kW_250kVA H-100 Control Panel - Manual

H-100 Control Panel
The H-100 Control Panel is a digital microprocessor electronic
controller.
• Two 4 line x 20 displays
• Full system status
• 3 phase sensing digital voltage regulator
• Remote ports
- RS232
- RS485
- Canbus
• Water proof connections
• All engine sensors are 4-20 ma for minimal interference
• Built in PLC In addition, the generator set parameters can be
manipulated and monitored without standing in front
of the control panel with GenLink ® software.
• Monitors utility voltage
• Monitors generator voltage
• Timer for line interrupt delay
• Timer for engine warmup
• Timer for minimum engine run time
• Timer for return to utility position
• Timer for engine cooldown
• Built in exerciser timer (7 day)
• Additional 2 wire start controls for any 2 wire
transfer switch.
STANDARD FEATURES
DESCRIPTION
• Digital controls for all safety shutdowns
• Isochronous governor control
• Digital 3ø sensing voltage regulator
• Sealed Digital Circuit Board
• 2 Amp static battery charger
• Mates with any 2-wire start ATS switch
• Alarm and event logging
• Built-in diagnostics
• Internal PLC
• Optional modem with dialout