Milton CAT 365C L - Manual (Page 7)

Cab Design. The workstation has
been designed to be spacious, quiet and
comfortable for the operator, assuring
high productivity throughout the entire
workday. Switches are conveniently
located for easy access. The new monitor
is located to provide excellent visibility
and access.
Seat. The 365C L seat provides a
variety of adjustments, including
fore/aft, height and weight to suit the
operator. Also included are adjustable
armrests and a retractable seat belt.
For additional comfort, a new heated
air suspension seat is available as an
attachment.
Hydraulic Activation Control Lever.
The hydraulic activation control
lever deactivates hydraulic functions
during engine start-up, and prevents
unintentional machine operation.
Climate Control. Positive filtered
ventilation with a pressurized cab comes
standard on the 365C L. Fresh air or
re-circulated air can be selected with
a switch on the left console.
Windows. To maximize visibility,
all glass is affixed directly to the cab
eliminating the use of window frames.
The upper front windshield opens,
closes and stores on the roof above the
operator with a one-touch action release
system. The lower front windshield
features a rounded design to maximize
downward visibility and improves
wiper coverage.
Wipers. Pillar-mounted parallelogram
wiper, including a washer nozzle,
increases the operator’s viewing area and
offers continuous and intermittent modes.
Skylight. An enlarged skylight with
sunshade provides excellent visibility
and good ventilation.
Monitor. The compact, full-color,
graphical display monitor is new with
the 365C L. The monitor has functions
to display machine, maintenance,
diagnostic and prognostic information.
The angle of the monitor can be adjusted
to face the operator and prevent sun glare.
Consoles. Redesigned consoles feature
a simple, functional design to reduce
operator fatigue, ease of switch operation
and excellent visibility. Both consoles
have attached armrests and allow the
height of the armrests to be adjusted.
Cab Exterior. The exterior design uses
thick steel tubing along the bottom
perimeter of the cab, improving the
resistance of fatigue and vibration.
This design allows the FOGS to be
bolted directly to the cab, at the factory
or as an attachment later, enabling the
machine to meet specifications and job
site requirements.
Cab Mounts. The cab shell is attached
to the frame with viscous rubber cab
mounts, which dampen vibrations
and sound levels while enhancing
operator comfort.
Standard Cab Equipment. To enhance
operator comfort and productivity,
the 365C L cab includes a lighter,
drink holder, coat hook, service meter,
literature holder, magazine rack and
storage compartment. The cab also
comes equipped with two, 12V-7 Amp
electrical sockets to provide additional
electrical resources.
Machine Security. An optional Machine
Security System (MSS) is available
from the factory on the 365C L.
MSS uses a special Caterpillar key
with an embedded electronic chip for
controlling unauthorized machine
operation.
Product Link. The 365C L is “Product
Link Ready” from the factory.
7