M-AUDIO OmniStudio USB - Manual (Page 21)

Windows 98SE
Do NOT connect the OmniStudio USB to your computer’s USB port at this time.Insert the M-Audio driver CD-ROM into your computer. From
the Start menu, select “Run…” then click the Browse button. Browse to the CD drive and double-click the OmniStudio USB folder to open it.
Click on the Setup.EXE icon to begin the installation.
The M-Audio OmniStudio USB Installer screen will appear, asking you to confirm that you wish to install OmniStudio
USB. Click Next to continue.
The installer will begin to copy the OmniStudio USB files to your computer’s hard drive.
Once the driver files have successfully been installed, the CD Performance Enhancements screen will
appear. By default, the performance enhancement settings for CD and DVD playback will be selected.
It is recommended you leave them selected unless you are certain that your hardware is incompatible
with these settings.
Once the installer has finished copying the files, you will see the “Installation Complete” screen.
You will be prompted to restart your computer. Click Finish and your computer will reboot.
NOTE: OmniStudio USB requires that you have Microsoft DirectX version 8.1 or later installed. The OmniStudio USB installer
will automatically check for the correct version of DirectX and install the latest Direct X update. This update will be skipped if
you already have DirectX version 8.1 (or higher) in your system
20