M-AUDIO OmniStudio USB - Manual (Page 4)

Thank you for choosing the OmniStudio USB from M-Audio. We designed the OmniStudio USB to be a complete multi-channel recording and
playback solution for your PC- or Mac-based Digital Audio Workstation (DAW). Using the convenience and dependability of a standard USB
connection, the OmniStudio USB provides you with an exceptionally flexible audio interface offering unparalleled routing power and
versatility, while delivering high-resolution 24-bit audio to and from your computer at sampling rates up to 96kHz. And it connects to your
computer with a single USB cable – no tools needed, and no cards to install.
The OmniStudio USB offers low-noise mic preamps with phantom power for condenser microphones, XLR mic and 1/4” line and instrument
level analog inputs. But the OmniStudio USB is more than just another analog “front end” for your computer. The OmniStudio USB also offers
an impressive array of hardware input and output options to give you the kind of routing control previously only possible with a hardware
mixing console.
Even if you’re an experienced recordist, please take some time to read through this owner’s manual and familiarize yourself with the
OmniStudio USB’s features and operation. You may also want to refer to your audio software’s documentation, to better understand how
the OmniStudio USB’s features are integrated with the program. Your experience and enjoyment of your OmniStudio USB will be greatly
enhanced by a good working knowledge of your audio software.
1. Introduction
3