Vdpdp136 – 4-channel controller – Velleman VDPDP136 User Manual

Page 4

Advertising
background image

VDPDP136_v2

HQ POWER

4

VDPDP136 – 4-CHANNEL CONTROLLER

1. Introduction & Features

To all residents of the European Union

Important environmental information about this product

This symbol on the device or the package indicates that disposal of the device after its lifecycle could harm

the environment.

Do not dispose of the unit (or batteries) as unsorted municipal waste; it should be taken to a specialized

company for recycling.

This device should be returned to your distributor or to a local recycling service.

Respect the local environmental rules.

If in doubt, contact your local waste disposal authorities.


Thank you for buying the VDPDP136! Please read the manual carefully before bringing this device into service.
This device features 42 fixed chaser programmes and the user can also create one 32-step programme. The device
can be used as a light organ or dimmer. Seven modes are available: hold dimmer, hold sound, programme sound,

programme chase, auto chase, auto speed and memory. The device also features a built-in microphone and an
external audio input. If the device was damaged in transit, don't install or use it and contact your dealer.

2. Safety Instructions

A qualified technician should install and service this device.

Damage caused by disregarding certain guidelines in this manual is not covered by the warranty and the dealer
will not accept responsibility for the ensuing defects or problems.

Do not switch the device on immediately if it has been exposed to changes in temperature. Protect the device

against damage by leaving it switched off until it has reached room temperature.

Make sure that the available voltage does not exceed the voltage stated in the specifications of this manual.

Do not crimp the power cord and protect it against damage from sharp edges. Ask an authorised dealer to replace
the cord if necessary.

Always disconnect the device from the mains when it is not in use or when you wish to clean it. Only handle the

power cord by the plug. Never pull out the plug by tugging the power cord.

Note that damage caused by user modifications to the device are not covered by the warranty. Keep the device
away from children and unauthorised users.

Install your VDPDP136 at a minimum distance of 1m of any object to ensure sufficient ventilation.

Do not impede ventilation by covering the ventilation sleeves with objects such as table cloths, paper…

Keep the device away from or do not place naked flame sources, such as candles, on top of the device.

Never place any objects filled with liquids, such as vases, on top of the device. The VDPDP136 should not be
exposed to splashing or dripping.

3. General Guidelines

This device is a lighting controller for professional use on stage, in discos, theatres, etc. The VDPDP136 should

only be used indoors on an alternating current of max. 230Vac/50Hz.

Do not shake the device. Avoid brute force when installing or operating the device.

Be very careful during the installation: touching live wires can cause life-threatening electroshocks.

Do not touch the device during operation as the housing heats up.

Keep this device away from rain and moisture.

Unplug the mains lead before opening the housing.

Advertising