Velleman VDPC146 - Manual (Page 8)

VDPC146
V. 02 – 21/10/2013 8 ©Velleman nv
7. Slide channel faders 2-4-6-8-10-12-14-16-18-20-22-24 to the top.
8. Press RECORD
The LED display shows 002.
9. Select CHASE / SCENES by pressing the MODE SELECT button.
10. Hold the RECORD button.
11. Press the first flash button in the lower channel faders portion (the flash button of channel 13).
12. Release both buttons. All LED channel indicators flash momentarily.
13. The running light is now programmed on page 1 under scene 1.
Now we want to see the light in action:
•
Slide both master faders to the bottom.
• Slide the SPEED fader to the top.
• Slide SCENE 1 fader to the top.
• Move the SPEED fader up or down to adjust the speed of the running light. When the SPEED fader is all the
way down and is on SHOW MODE, then you can press the STEP button to view the scene step by step.
• Press the AUDIO button (the green LED indicator will light) if you want the running light to react to music.
Adjust the music sensitivity with the AUDIOLEVEL fader. Press the AUDIO button again to leave the music
control mode.
• You can also synchronize the running light with the music manually: Tap the TAP SYNC button twice. The
interval between the two taps will determine the rhythm of the running light. In other words: tap the button
twice to the beat of the music. The SPEED fader will resume control when it is moved.
7. Speed settings
Speed adjustment (max. 5 min)
•
Hold the RECORD button.
• Press flash key 5 in PRESET A three times.
• Release the RECORD button.
The yellow LED indicator next to 5MIN (left) is now lit, indicating that the left scale is currently being used
for the SPEED fader.
Speed adjustment (max. 10 min)
1. Hold the RECORD button.
2. Press flash key 10 in PRESET A three times.
3. Release the RECORD button.
The yellow LED indicator next to 10MIN (right) is now lit, indicating that the left scale is now being used for
the SPEED fader.
8. Other functions
BLIND button
Hold the BLIND button.
Press the flash button to any channel to deactivate this channel.
HOME button
Hold the HOME button.
Press the flash button for any channel to reactivate this channel.
TAP SYNC button
Press this button twice to define the rhythm of the music manually (this only works in STEP mode and not in
the AUDIO mode). The interval between the two taps determines the speed)
FULL-ON button
All channel outputs go to 100% as long as the user holds this button.
BLACK OUT button
The programme continues to run but the connected devices do not receive the signal as long as the yellow
BLACK OUT indication LED is lit.
Press the BLACK OUT button again to deactivate this function.