Velleman WIFIR3 - Manual (Page 15)

WIFIR3
V. 01 – 22/08/2013 15 ©Velleman nv
7. Verify if the network name is correct. The name is used in two
fields:
o
SSID of Wireless AP
o
SSID of Extended Interface
If not, enter or paste the correct name in both fields.
8. Click Apply Changes.
You can now close the web management tool.
10.3 Reset your computers network settings
•
Reset your computer’s network settings as described in section
7.4.
10.4 Connect the wireless access point to your computer
To connect a computer to the wireless access, proceed as follows:
1. Log on to your computer.
2. Click the network icon
or located at the bottom right of
your screen. A list of networks appears.