Velleman PSI600B - Manual (Page 6)

PSI SERIES_v2 HQPOWER - 6 -
7. Measuring AC Voltages
The output wave of the AC inverter is a MODIFIED SINEWAVE. An AUTHENTIC RMS VOLT METER is required to
measure the AC output voltage. Using any other type of voltage measuring device will result in an AC voltage
reading that is up to 20 to 30V lower than the rated value. Only an authentic RMS voltmeter provides an accurate
reading.
8. Technical Specifications
The following chart contains all VELLEMAN square wave inverters. Every type is available in a 12V or a 24V version.
The suffix x or xx stands for the plug type of the output.
S = German type Schuko plug
B = French type Schuko plug
PSI150 PSI300 PSI600
DC Input Voltage DC 10V – 15V (12V) / DC 20V – 30V (24V)
Output Voltage 150W 300W 600W
Battery-Low alarm 10.5VDC +/- 0.5VDC (12V) / 21VDC +/- 1VDC (24V)
Battery-Low Shutdown 10VDC +/- 0.5VDC (12V) / 20VDC +/- 1VDC (24V)
Auto restart The power inverter being shut off through e.g. the short-circuit protection does not
need to be switched on manually; it will restart automatically.
Short-circuit Protection Yes, with auto restart
No-Load Current 250mA (12V) 0.3A (12V) 0.4A (12V)
Overheating Protection 55°C +/- 5°C
Protection Overload, high temperature, short-circuit, reverse polarity protection
Dimensions 160 x 104 x 58 180 x 104 x 59 210 x 91 x 58
Weight 730g 830g 1100g
AC Output Voltage 230VAC +/- 5%
Frequency 50Hz +/- 1Hz
For more info concerning this product, please visit our website www.velleman.eu.
The information in this manual is subject to change without prior notice.