Velleman PI300BN - Manual (Page 8)

PI300W // 12V & 24V VELLEMAN 7
12. MAINTENANCE
Very little maintenance is required to keep your inverter operating smoothly. Clean
the exterior of the device periodically using a damp cloth in order to prevent the
accumulation of dust and dirt. Tighten the screws on the DC input terminals
whenever you are cleaning the device.
13. REMARK
All specifications are typical at nominal input voltage, 50% load and 25°C unless
otherwise noted. All specifications are subject to change without prior notice
WARNING : DO NOT DISASSEMBLE THIS DEVICE AS DOING SO MAY
CAUSE HAZARDOUS VOLTAGES !! RETURN THIS DEVICE TO THE DEALER
IN CASE OF TROUBLE !!
14. SPECIFICATIONS
DC input voltage
DC 10-15V (12V) // DC 20-30V (24V)
Output power 300W
Output power surge 1000W
Battery-low alarm 10.5 ± 0.5V (12V) // 21 ± 1V (24V)
Battery-low shutdown 10 ± 0.5V (12V) // 20 ± 1V (24V)
Battery-high shutdown .5 ± 0.5V (12V) // 30 ± 1V (24V)
Short circuit protection yes
No-load current < 0.3A
Alarm and thermal shutdown 60°C ± 5°C
DC input fuse 35A (12V) // 20A (24V)
Dimensions (L x W x H) 190 x 91 x 58mm
Net weight 1.1kg
AC output voltage 230V
Frequency 50Hz
AC output socket PI300MN // PI30024MN
AC output socket PI300BN // PI30024BN
Important Remark
A car plug with extension cord is available in option (max. 15A) : PLUGC8