Velleman TIMER10 - Manual (Page 3)

TIMER10
V. 01 – 18/03/2013 3 ©Velleman nv
4. Operation
 Slide the battery compartment at the back of the timer open,
remove the plastic protective tab and close the battery
compartment.
 Press the MIN button to increase the minutes; press the SEC
button to increase the seconds. Press and hold down the button to
increase setting speed.
 Pressing the MIN and SEC buttons simultaneously will reset the
time to 00:00 (zero).
 Press the START/STOP button to start countdown. When the timer
reaches 00:00, an alarm will sound.
 Press any button to stop the alarm.
Note: when the timer is at 00:00 and the start-button is pressed,
the timer will start counting up.
 Place the device on a table or use the clip or the magnet at the
back.
5. Technical Specifications
colour white
dimensions 76 x 45 x 16 mm
power supply 1 x 1.5V LR44 battery (V13GAC,
included)
LCD 38 x 17 mm
weight ± 35 g
Use this device with original accessories only. Velleman nv
cannot be held responsible in the event of damage or injury
resulting from (incorrect) use of this device. For more info
concerning this product and the latest version of this manual,
please visit our website www.velleman.eu. The information in
this manual is subject to change without prior notice.