Care of your atlas scr – Velleman SCR100 User Manual
Page 11
Atlas SCR User Guide
January 2008 – Rev 3
Page 11
Care of your Atlas SCR
The Peak Atlas SCR should provide many years
of service if used in accordance with this user
guide. Care should be taken not to expose your unit
to excessive heat, shock or moisture. Additionally, the battery
should be replaced at least every 12 months to reduce the risk of leak
damage.
If a low battery warning message
appears, replacement of the battery is
mandatory. The Atlas will not continue
to operate if this condition is
encountered.
New batteries can be purchased from many retailers and directly from Peak
Electronic Design Ltd or an authorised agent.
Battery types: Suitable battery types include 23A, V23A, GP23A, MN21 or a
good quality 12V alkaline equivalent as used in many test instruments and
automotive remote key fobs.
Battery access: To replace the battery, unscrew the three screws to remove the
rear panel. Remove the old battery and insert a new one, taking care to observe
the correct polarity. Carefully replace the rear panel, do not over-tighten the
screws.
Peak Safe Battery Disposal Scheme: Please return your old analyser battery to
Peak Electronic Design Ltd for safe and environmentally responsible disposal.
Low Battery