Fuse replacement, Technical specifications, Gebruikershandleiding – Velleman VTSSC75 User Manual

Page 7: Inleiding, Veiligheidsinstructies

Advertising
background image

VTSSC75

V. 03 – 06/02/2013

7

©Velleman nv

12. Fuse Replacement

Refer to the illustrations on page 2 of this manual.
1. Switch off the soldering station [5] and unplug it from the mains.
2. Release the screw at the back of the station [X] and lift the top cover.
3. Locate the fuse [F] and replace it. Only replace the fuse by a fuse of the same type and rating.
4. Close the top cover and put the screw [X] back.

13. Technical Specifications

max. heater power for soldering iron

60 W

temperature range

150 - 480 °C (302 - 896 °F)

iron voltage

230 VAC

weight

770 g

dimensions

105 x 90 x 90 mm

Use this device with original accessories only. Velleman nv cannot be held responsible in the
event of damage or injury resulting from (incorrect) use of this device.
For more info concerning this product and the latest version of this manual, please visit our
website www.velleman.eu.
The information in this manual is subject to change without prior notice.

© COPYRIGHT NOTICE

The copyright to this manual is owned by Velleman nv. All worldwide rights reserved. No part
of this manual may be copied, reproduced, translated or reduced to any electronic medium or otherwise
without the prior written consent of the copyright holder.

GEBRUIKERSHANDLEIDING

1.

Inleiding

Aan alle ingezetenen van de Europese Unie
Belangrijke milieu-informatie betreffende dit product

Dit symbool op het toestel of de verpakking geeft aan dat, als het na zijn levenscyclus wordt

weggeworpen, dit toestel schade kan toebrengen aan het milieu. Gooi dit toestel (en eventuele
batterijen) niet bij het gewone huishoudelijke afval; het moet bij een gespecialiseerd bedrijf
terechtkomen voor recyclage. U moet dit toestel naar uw verdeler of naar een lokaal
recyclagepunt brengen. Respecteer de plaatselijke milieuwetgeving.
Hebt u vragen, contacteer dan de plaatselijke autoriteiten betreffend de

verwijdering.
Dank u voor uw aankoop! Lees deze handleiding grondig voor u het toestel in gebruik neemt. Werd het
toestel beschadigd tijdens het transport, installeer het dan niet en raadpleeg uw dealer.
De VTSSC75 wordt geleverd met:

1x soldeerstation + voedingskabel

1x soldeerbout + punt en houder met puntreiniger.

2.

Veiligheidsinstructies

Dit toestel is niet geschikt voor gebruik door personen (kinderen inbegrepen) met verminderde
fysieke, zintuiglijke of geestelijke capaciteiten of gebrek aan ervaring en kennis, tenzij zij onder
toezicht staan of instructie hebben gekregen over het gebruik van het toestel van een persoon
die verantwoordelijk is voor hun veiligheid.
Houd toezicht op kinderen om te voorkomen dat ze met het apparaat spelen.

Vermijd gebruik in de buurt van brandbare producten of explosieve gassen. Gebruik enkel in een
goed geventileerde ruimte.

Advertising