Velleman CCTVPROM15 User Manual
Page 9
CCTVPROM15
V. 1.0 – 07/12/2012
9
©Velleman nv
8.2
Installing the EagleEyes app
Prerequisites
Before installing EagleEyes to your mobile phone for remote surveillance, make sure you have checked the
following:
•
You have subscribed to and you can access mobile internet services for your mobile phone.
•
Note: You might be charged for internet access via wireless or 3G networks. For the internet access rate
details, please check with your local network operator or service provider.
•
You have noted down the IP address, port number, user name and password used to access your network
camera from the internet.
Where to download
1.
Connect to www.eagleeyescctv.com from your mobile device, and sign in.
Please do not try to download EagleEyes from your computer.
o
For Android, select the download link from the website to start downloading.
o
For iPhone and iPad, two versions of EagleEyes are available: EagleEyesHD Plus (at a fee), and
EagleEyesHD Lite (free).
2.
Select the version you want, and you will be directed to the App Store to download the application.
3.
When the download is completed, EagleEyes will install automatically to the default location or any location
you choose.
Note: For more details about configuring and operating EagleEyes, please visit our official website
www.avtech.com.tw.
8.3
Configuration
Before configuring push video, make sure:
1.
The DVR system is set up as described in point 3 Connection and Setup in the full manual on the included
CD-ROM.
2.
The DVR is connected to the internet.
3.
The EagleEyes app is installed on your mobile device (see Installing the EagleEyes app above).
Steps
1.
On the DVR, right click to display the main menu.
Go to Advanced Config.
> Notify.
Set Guard to On and configure your alarm sensor type (N.C. or N.O.).
2.
Open EagleEyes, and add this DVR to the EagleEyes address book.
For more details about EagleEyes operation, please visit www.eagleeyescctv.com.
3.
In the EagleEyes app, enable push video as described below.
4.
Trigger the alarm sensor to see if you successfully receive push video.