Gasiron2 – gassoldeerbout – Velleman GASIRON2 User Manual

Page 2

Advertising
background image

GASIRON2

2

VELLEMAN

d. Flame / Heat Adjustment


Adjust the gas flow by means of the gas volume control (#7). Rotate it to the + or the - to increase or decrease the
gas flow.

e. Refilling the Gas Tank


1. Make sure the on/off switch (#6) is set to OFF and the GASIRON2 has cooled down completely.
2. Refill the device in a well-ventilated area away from any ignition source and away from other people. Do not

smoke while refilling the gas torch.

3. Refill with butane gas only.
4. Hold the GASIRON2 upside down, insert the nozzle of the butane canister into the gas refill valve and press the

canister down to let the gas flow from the canister into the gas tank of the soldering iron.

5. When the gas stops flowing, pull the canister out of the refill valve.

5. Safety Warnings & Hints


• The gas tank of the GASIRON2 should not make contact with alcohol or liquids containing alcohol.
• Do not use water to cool down the soldering iron as this may damage it.
• Keep the device out of reach of children and unauthorized users.
• Do not use the GASIRON2 when it is damaged or leaking gas.
• Allow the gas to stabilize before using the device after a refill.
• Do not refill the soldering iron in the room where you are going to use it or in a room with ignition sources.
• Do not put an ignited GASIRON2 down on any surface.
• Do not tamper with the device ; any modification could cause a potential hazard.
• Be careful not to heat or burn the refill canisters or the device's gas tank.
• Work only in a well-ventilated area and keep the working space tidy and free from combustible or greasy materials.
• Always wear eye protection and protective gloves when working with the GASIRON2.
WARNING: the flame is not easily visible in the sun.
• Do not point the flame towards people or animals.
• Treat the GASIRON2 as you would any fine tool or instrument. Do not drop or otherwise abuse it.
• Do not store the device in a place where the temperature can exceed 40°C (104°F).


The information in this manual is subject to change without prior notice.

GASIRON2 – GASSOLDEERBOUT

1. Inleiding en kenmerken


Dank u voor uw aankoop! Lees deze handleiding grondig voor u het toestel in gebruik neemt. Als het toestel werd
beschadigd tijdens het transport, installeer het dan niet en raadpleeg uw dealer.

2. Onderdelen

(zie figuur blz. 1)


1. Soldeerpunt
2. Luchtuitlaat
3. Ontstekingsopening
4. Bevestigingsring
5. Statief

6. aan/uit schakelaar
7. Gasregelaar
8. Gasreservoir
9. Bijvulventiel
10. Straalpijp

Advertising