Velleman HAA55 - Manual (Page 3)

HAA55_v2 VELLEMAN - 3 -
Coverage pattern – top view
PCB
3. PCB
1 PIR detector 6 JP2
2 tamper switch ♦ 7 JP3
3 LEDs 8 relay
4 PIR adjustment 9 connection terminal
5 JP1 10 M/W adjustment
♦ connect with controlling unit, alarm will sound when the front cover is opened
4. Jumper Setting
Place the bridge onto the desired pins.
JP1: OFF: LED is disabled
ON: LED is enabled
JP2: pulse width adjustment
2s: output pulse of 2 seconds
4s: output pulse of 4 seconds
JP3: A: high sensibility
B: low sensibility
no bridge: glass break detector disabled