Velleman DVR16H1 Quick Installation Guide User Manual

Page 8

Advertising
background image

DVR16H1

14/04/2011

©

Velleman nv

8

recording mode

alarm mode

administrator logged on

operator logged on

Note that actual screen icons might differ slightly from the ones shown above.
Quick menu bar
Note:
only available when USB mouse is connected.
• Move the pointer towards the left of the monitor to open the quick menu bar:

Open channel switch panel.

Show playback control panel.

Zoom-in mode (select desired channel first before entering zoom-mode).

Select audio channel (live mode only live channels can be selected).

Enter PTZ mode and show PTZ control panel

Recording
• Check whether the camera(s) is (are) properly connected and a HDD is present inside the device.

• When the auto-recording and pre-alarm functions are enabled, the device will start recording

images.

• Default the recording icon (

) is shown.

• In case the motion or alarm detection is activated and a motion or alarm is detected, the motion

(

) resp. alarm (

) icon is shown.

• When timed recording is enabled, the timed recording icon (

) is showed and the timed recording

LED is on.

• Default, the device is in HDD overwrite mode and the icon (

) is shown.

Play-back
• Make sure the control panel is not locked and press the PLAY button on the control panel or use

the quick menu bar to open the playback control panel:

A

progress bar

D information

B

playback control

E close

C

event search

Note: play-back needs at least 8192 recorded images to work properly (e.g. with IPS=30, the

recording must be at least 273 seconds long).

• The fast forward (

) and fast rewind (

) buttons will increase resp. decrease the play-back

speed. Repeatedly pressing the button will increase/decrease speed to 4x, 8x 16x or 32x (max.).

• Press the pause button (

) to temporary suspend video play-back.

• Press the stop button (

) to return to live monitoring.

• Press the SLOW button once to set play-back speed to 1/4

th

and twice for 1/8

th

.

Search
• There are four ways to search recorded files: by record list, motion list, alarm list or by timer list.

Advertising