Velleman HAA80 - Manual

HAA80 VELLEMAN 1
HAA80 -- SECURITY PANEL WITH KEY SWITCH
1. Introduction and Characteristics
Thank you for buying the HAA80 ! The HAA80 was designed for security applications with ON/OFF control. The
keypad is equipped with universal connection terminals and can be therefore be used with most alarm systems.
The HAA80 is equipped with a N.O. contact, an anti-tamper switch and 2 LEDs to be connected at will.
2. Description
1-2 : N.O. contact of the key switch (max. 3A). Turn the key clockwise 90° in order to establish contact.
3-8 : Green LED with an internal resistor of 1Kohm, connected in series. Connect the positive (+) power supply of
12VDC with 3 and the ground connection (-) with 8.
4-7 : Red LED with an internal resistor of 1Kohm, connected in series. Connect the positive (+) power supply of
12VDC with 4 and the ground connection (-) with 7.
5-6 : The N.C. contact of the anti-tamper switch (max. 0.5A) is closed when the housing is closed. Slide the flexible
sleeve (included) over the lever of the anti-tamper switch, ensuring that the latter is pressed down when the
housing is closed.
3. Connection Terminals
ENGLISH NEDERLANDS FRANÇAIS
A
green groen vert
B red rood rouge
C tamper switch anti-sabotage schakelaar interrupteur anti-sabotage
D
key switch sleutelschakelaar interrupteur à clé
E 5-core wire 5-aderige kabel câble à 5 brins
F alarm control panel controlepaneel panneau de commande
G
ON/OFF control ON/OFF controle contrôle ON/OFF
H +12V supply +12V voeding alimentation +12V
I tamper anti-sabotage anti-sabotage
J
red LED (-) rode LED (-) LED rouge (-)
K green LED (-) groene LED (-) LED verte (-)