Alpine INA-W910R User Manual
Page 30
INA-W910R Navigation Software Owner’s Manual
30
new location. Tap
to confirm the destination, or tap
to select a different destination.
7.
After a short summary of the route parameters, the map appears showing the entire
route. The route is automatically calculated. Tap
to modify route
parameters, or tap
and start your journey.
3.1.1.5 Entering an address with a postal code
All of the above address searching possibilities can be performed with entering the postal
code instead of the city/town name. Find below an example with a full address:
1.
If you are on the Map screen, press Navi Menu to return to the Navigation menu.
2.
In the Navigation menu, tap the following buttons:
,
.
3.
If necessary, modify the country as described earlier (page 24).
4.
Enter a new city/town using its postal code:
a.
Tap
.
b.
Start entering the postal code.
c.
Find the city/town you need:
•
The most likely postal code is always shown in the input field. To accept
it, tap
.
•
If the desired number does not show up, open the list of results by
tapping
. Select the postal code from the list.