ACP MOC5241 Owner's Manual - Manual (Page 6)

6
Display and Features
Single Pad Programming
This feature enables each numbered pad to be programmed for a specific
use, such as cooking a certain number of potatoes or defrosting and then
cooking vegetables or other frozen foods. To use this feature, simply
program the pad to the desired length of time and power level. To use this
feature, press the pad once and the microwave will begin cooking.
Double Pad Programming
This feature enables 100 programmed entries to be made. Each entry will
be assigned a double digit number, for example 01, 05, or 20. When using
the double pad programming, two pads must be pressed to start the cooking
cycle.
Manual Time Entry
In addition to programmable pads, this microwave also accepts specific time
entry by using the TIME ENTRY
pad. Using manual time entry does
not affect the programmed buttons.
Stage Cooking
Stage cooking is a cooking sequence with specific power stage changes.
The user can program up to four different power level changes and the
specific amount of cooking time at each power level. Each power level/
cooking time combination is known as a stage. Up to four stages can be
programmed.
User Options
This microwave can be set for specific user preferences. Options such as
beep volume, maximum cooking time, and the number of programmable
pads can be changed. To change different options, see User Options in this
manual.
Start Pad
The start pad is used to begin a
manual time entry cooking cycle. It
is also used to save any changes
to programming sequences or user
options.
STOP Pad
The STOP pad stops a cooking
sequence in progress, and also ends
a programming or user option cycle.
When the STOP pad is used to end
a programming or option change,
the changes are discarded. The
STOP pad can also be used to open
the door after it has been closed.
Start Stop Power Level
Time Entry