ACP MOC5241 Owner's Manual - Manual (Page 9)

9
Programming Items
1. Press and hold pad 1 for approximately 5 seconds.
2. Press pad to be reprogrammed.
3. Enter cooking time by using the number pads.
4. Press POWER LEVEL
pad to program level of microwave power
if desired.
• For a lower microwave power, press pads 1 (for 10%),
through 9 (for 90%), or 0 for no microwave energy.
NOTE: Press POWER LEVEL pad twice to return to 100%
microwave power.
5. Press TIME ENTRY pad to add up to four additional cooking
stages.
• Maximum cooking time cannot exceed 10 minutes per user
options.
• Total cooking time factory setting is 5 minutes.
• Enter cook time and power level as in steps 4 and 5.
6. Press START pad to set new programming changes to the
pad.
NOTE: To discard changes, press STOP pad or close oven door.
7. Press STOP to exit programming mode.
Programming the Oven Control