ACP RC22S2 Owner's Manual - Manual (Page 7)

7
Display and Features
START Pad
The start pad is used
to begin a manual
time entry cooking
cycle.
STOP/RESET
pad
The STOP/RESET
pad stops a cooking
sequence in progress,
clears out any remaining time, and
also ends a programming or user
option cycle. When the STOP/
RESET pad is used to end a
programming or option change, the
changes are discarded.
Single Pad Programming
This feature enables each numbered pad to be
programmed for a specific use, such as cooking a
certain number of potatoes or defrosting and then
cooking vegetables or other frozen foods. To use this
feature, simply program the pad to the desired length of time and power
level. To use this feature, press the pad once and the microwave will begin
cooking.
Double Pad Programming
This feature enables 100 programmed entries to be
made. Each entry will be assigned a double digit
number, for example 01, 05, or 20. When using the
double pad programming, two pads must be pressed to
start the cooking cycle.
Manual Time Entry
In addition to programmable pads, this microwave also accepts
specific time entry by using the TIME ENTRY pad. Using
manual time entry does not affect the programmed buttons.
Quantity Pad
The quantity pad increases a preset cooking time by a
percentage of the original cooking time. The user specifies
the percentage and it can be changed for individual cooking
sequences. Quantity can be increased up to 8 times. Once pressed, QTY
will display with the number times the cooking time will be extended. This
feature is very useful for cooking multiple servings of foods such as potatoes
or slices of pizza.
Stage Cooking
Stage cooking is a cooking sequence with specific power
stage changes. The user can program up to four different
power level changes and the specific amount of cooking time at each power
level. Each power level/cooking time combination is known as a stage. Up to
four stages can be programmed.
User Options
This microwave can be set for specific user preferences. Options such as
beep volume, and the number of programmable pads can be changed. To
change different options, see User Options in this manual.
Mid-Cycle Cooking Pause
The cooking pause is a feature
unique to this series of microwaves.
This pause enables extra ingredients
to be added, cooking progress
to be checked, or for food to sit a
necessary amount of time between
cooking time or power settings.
To utilize Cooking Pause, follow
programming sequences for
programmable pads.
Power Level Quantity
Time Entry Stage Program Save