ACP RCS10DSE Quick Start Guide - Manual (Page 2)

 2012 ACP , Inc.
Cedar Rapids, Iowa 52404
Part No.20120201
Revised 7/12
F
or full product documentation visit:
www.acpsolutions.com
Refer to Product Safety Manual for Safety Statements
Complete Owner’s Manual available online
Quick Start Reference Guide
Changing Timer Option
Timer resetting to zero can be set at any time to pause current cook time and power level when door is opened. To
change this option follow the step below.
• With door open press and hold the 100% pad
100%
for 5 seconds until beep is heard. Close the door this
changes timer setting to pause current cook time and power level when door is opened.
Timer pausing current cook time and power level can be set at any time to reset to zero and 100% power level when
door is opened. To change this option follow the step below.
• With door open press and hold the 20% pad
20%
for 5 seconds until beep is heard. Close the door this
changes timer setting to reset timer to zero and power level to 100% when door is opened.
The switching operation of this microwave oven can cause voltage fluctuations on the supply line. The operation of this oven under unfavorable voltage
supply conditions can have adverse effects. This device is intended for the connection to a power supply system with a maximum permissible system
impedance Zmax of
0.2 Ohms at the interface point of the user’s supply. The user has to ensure that this device is connected only to a power
supply system which fulfills the requirement above. If necessary, the user can ask the public power supply company for the system impedance at
the interface point.