Toner Cable PT-1 Pocket Toner - Manual

Cable Preparation Tools
969 Horsham Road l Horsham, Pennsylvania 19044 USA l Phone: 215-675-2053 Fax: 215-675-7543 l [email protected]
CST-59611
Self contained, 1 piece tool for preparation of coaxial drop cables, for installation
of “F” connectors.
z
Strips RG-59 and RG-6 (1/4” x 1/4”)
z
Strips RG-7 and RG-11 (1/4” x 5/16”)
z
Fast, easy, one-step operation
z
Repeatable accurate cable preparation
z
Integral stop for proper center conductor length
z
V-notched blade eliminates damage to center
conductor
z
Easily replaceable blade cartridges
z
Bright yellow body makes it easy to find
z
Rugged nylon construction
CST-596
Coax Strip Tool RG-59 and RG-6
z
Prepares Cable to Proper Dimensions
z
Notch in Blade to Prevent Damage to Copper
on Center Conductor
z
Adjustable Blade Depth for Standard / Tri /
Quad Shield Cables
z
Replaceable Blades (Part #CST-596BL)
PT-1
Pocket Toner
The Pocket Toner is a simple, easy to use tool to “ring
out cables”. By attaching the battery section to either a
male or female F connector of the cable you are trying
to trace or identify, and then fitting the smaller “buzzer”
piece to any cables where you think your cable termi-
nates, you will identify the correct cable when the
buzzer sounds.
z
Machined Aluminum Construction
z
Plated Brass Fittings
z
Battery LED, 12 Volt A23 Battery
z
Pocket Clip