Toner Cable T18 Staple Guns - Manual

Specifications Subject To Change Without Notice Rev 10-11 ©Toner Cable Equipment, Inc.
969 Horsham Road l Horsham, Pennsylvania 19044 USA l Phone: 215-675-2053 Fax: 215-675-7543 l [email protected]
T59 TM Loads (30) 5911 insulated chisel-
point staples with 11/16” leg length.
Insulators have inner dimensions
from 1/4” x 1/4” to 5/16” x 5/16”.
#5911 type Insulated Staples are
specially coated to triple their hold-
ing power.
µ
All-steel construction
µ Grooved driving blade
µ
Patented, jam-proof
mechanism
µ Short-Span, easy
compression handle
µ
Chrome Finish
µ Grooved guide
T18 TM Loads (85) T18 staples with 3/16”
crown-divergent point of .050 wire in
3/8” and 7/16” leg lengths.
Improved to drive tightly on new thin
telephone wire.
T25 TM Loads (85) T25 staples with 1/4”
crown-divergent point of .050 wire in
9/32”, 3/8”, 7/16” and 9/16” leg
lengths.
T37 TM Loads (85) T37 staples with 3/8”
crown-divergent point of .050 wire in
3/8”, 1/2” and 9/16” leg lengths.
T75 TM Loads (53) T75 staples with 1/2”
crown-divergent point of 0.75 wire in
9/16”, 5/8” and 7/8” leg lengths.
For the Pro or the Do-It-Yourselfer
Safety, speed and efficiency are built-in performance factors that
have made Arrow Staple Gun Tackers the preferred fastening tools
of professional wire and cable installers in every field. 5 precision-
made Arrow models, using a total of 15 different staple sizes, fit a
wide range of wire and cable diameters for safer, snugger and
neater fastening. Ideal for installing: Telephones, TV, Cable,
Intercom and Burglar Alarm Systems. Also Hollow Tubing, Radiant
Heat Cable and virtually any application of wire.
Staple Guns
For Every Wire and Cable Fastening Requirement