Installation, Before you begin, Hardware reference – Toner Cable D12 Digital Satellite Receiver User Manual

Page 64

Advertising
background image

Before You Begin

Installation

56

Before You Begin

Your satellite dish antenna must be installed before you can begin following the procedures in this User

Guide. (Professional installation is highly recommended.) Your dish needs to be mounted in a position

where it has access to the satellite signals, and RG-6 coaxial cables must be run into the room(s) where

your receiver(s) will be located. If you choose to install the dish yourself, see the separate instruction

manual that came with your satellite dish antenna.

Hardware Reference

General

Satellite Dish Antenna

This is your “dish” and related hardware, affixed to your roof or other surface, which picks up the

broadcast signals from our satellites.

DIRECTV Receiver (or Satellite Receiver)

Your DIRECTV Receiver picks up the signal from your satellite dish antenna and translates it into

viewable TV programming.

Access Card

Contains information about your DIRECTV® service. It must be properly inserted for your receiver to

work and to activate your programming.

D I R E C T V

D12_MUG.indb 56

D12_MUG.indb 56

11/1/06 5:52:36 PM

11/1/06 5:52:36 PM

Advertising